Copyright FoldingCamperInformation 2009 - Site maintained by ImpactWebMasters.co.uk

You Are Here -

Contact Us on 01604 785400

www.FoldingCamperInformation.co.uk

Make: Pennine

Model: Pullman  -  The Pullman is a mid size high spec six berth folding camper, with mains 240v and fridge. Later models have gas springs to lift the beds over, sprung mattresses and hot water. Awnings are an optional extra.

Set up Instructions

External

• Apply brake, level with the jokey wheel and wind down the legs
• Level the trailer front to back, not side to side
• Turn on gas and remove any bits from gas locker.
• Remove cover by undoing shock cord and fold in half and half again
• Take back corners and bring them to the front centre of the trailer, making a triangle shape
• Now roll cover forwards, it can stay rolled above the gas locker
• At the back of the trailer, pull out and lock bed support, unclip beds from body
• Lift back bed over first and fix to bed support with two Velcro straps
• Lift over front bed and fix to supports on trailer “A” frame with Velcro straps
• Pull canvas down all round the trailer
• Push all five roof pole sections up to their middle position
• Attach canvas to body, starting with the Velcro on the bed ends
• Then Velcro on main body and finally the shock cord under beds

Internal

• Step inside, lift wardrobe on hinge and slide onto cupboard
• Lay seat backs on the seat base and stand table to one side
• Lift sink into place and connect water hose style push fit
• Now hob can be set up next to the sink. Connect gas, again also push fit
• Shelf fits next to the sink by hooking onto side of unit
• Set up seats by placing backrest in place
• Fit curtains by inserting poles and using hoops on roof lining

 

The earlier models have a one piece sink / hob unit. Not all models have shelf units.

With the earlier models, the shelf units mount on poles in holes next to sink / hob