Copyright FoldingCamperInformation 2009 - Site maintained by ImpactWebMasters.co.uk

You Are Here -

Contact Us on 01604 785400

www.FoldingCamperInformation.co.uk

Make: Pennine

Model: Fiesta -  The Fiesta is a top of the range berth folding camper with fridge, mains 240v.. Awnings are an optional extra.

Set up Instructions

External

• Apply brake, level with the jokey wheel and wind down the legs
• Level the trailer front to back, not side to side
• Remove cover, undo shock cord, fold in half then fold in half again
• Take back corners and bring them to the front centre of the trailer, making a triangle shape
• Now roll cover forwards, it can stay rolled above gas locker
• Lift over top bed and adjust legs so the beds sits level
• Lift over second bed and adjust legs so bed sits level
• Pull canvas down all round trailer

Internal

• Step inside and unstrap, raise roof bars and join at apex
• Extend roof bars by pushing button in and extending
• Raise upright poles and bed poles to middle setting
• Lift and extend kitchen poles, find two support poles behind sink
• Fit the support poles to top corners of kitchen poles and uprights
• Attach canvas to body, starting with the Velcro on the bed ends
• Then Velcro on main body and finally the shock cord under the beds
• Lift hob / sink unit up and move to the right to fit on the stand
• Gas and water stay connected, open lids and fit side panels
• 0n 2+2 model the bed on the right side makes up the seat
• Unstrap the bed  and remove small back part of mattress. Lift pole section
• Lift backrest pole section and find two support bars fitted to back of bed
• Clip these to bracket and replace mattress as backrest
• The seat on the other side is made up by lifting the two side bars
• Slot the backrest onto them and fitting cushion onto the frame
• Fit curtains by inserting poles and using hoops on roof lining