Copyright FoldingCamperInformation 2009 - Site maintained by ImpactWebMasters.co.uk

You Are Here -

Contact Us on 01604 785400

www.FoldingCamperInformation.co.uk

Make: Conway

Model: Continental -  The Continental the first in the range of six berth folding campers with a basic, very easy to set up interior. Awnings are an optional extra.

Set up Instructions

External

• Apply brake, level with the jokey wheel and wind down the legs
• Level the trailer front to back, not side to side
• Turn on gas and remove any bits from the gas locker
• Remove cover, undo shock cord, fold in half then fold in half again
• Take back corners and bring them to the front centre of the trailer, making a triangle shape
• Now roll cover forwards, it can stay rolled above gas locker
• At the back of the trailer, pull out and lock bed support
• Unclip beds from body (later models), lift back bed over first and fix to bed support with two Velcro straps
• Lift over front bed and fix support on trailer “A” frame
• Pull canvas down all round trailer
• Push all five roof pole sections up to their middle position
• Attach canvas to body starting with the Velcro on the bed ends
• Then Velcro on main body and finally the shock cord under beds

Internal

• Step inside and Lay seat backs on seat base and stand table to one side
• Lift sink / hob into place and connect water and gas, push fit
• Set up seats by placing backrest in place
• Fit curtains by inserting poles and using hoops on roof lining